StoneTech™ Enhancer Pro™ Heavy Duty Color Enhancing Impregnating Stone Sealer
from Bane-Clene® Corp.
Enhancer Pro is a Solvent-Based Heavy Duty Color Enhancing Impregnating Stone Sealer. Two-in-one heavy duty formula enhances the natural color of interior stone and prevents stains. Formulated with advanced, solvent-based fluoro-chemicals to protect against tough oil & water-based stains. The new Enhancer Pro enhances stone beautifully and provides great protection against the toughest stains.
Enhancer Pro provides heavy duty color-enhancing protection to natural stone such as:
The Most Exciting New Benefits Are Highlighted Below:
Enhanced look now lasts up to 5 years in the sun! - Great for use outdoors.
Break through UV resistant formula prevents enhancement from fading when exposed to sunlight.
Easier to use and clean up due to improved “dry-time technology”.
Improved long-term stain resistance against oil and water-based stains and durability.
New formula contains 4 times the amount of active ingredients.
Micro-molecular technology allows sealer to bond with the stone surface to deliver unsurpassed durability.
Antimicrobial product protection.
Improved surface coverage - new formula will cover 30-50% more square feet. Only 1 coat required for many stones.
Contains low-odor FDA-approved solvent.
Interior and exterior use,
Enhancer Plus Pro helps surfaces look better, last longer and clean up more easily.
Enhancer Plus Pro enhances and deepens the color intensity of new surfaces and reviving faded, weathered colors to better than new -- inside or out.
HELPS SEALS OUT WATER but allows moisture vapor transmission.
Directions for Sealing and Enhancing Stone such as Limestone & Marble with Enhancer Pro:
Keep out of reach of children.
Read label directions and cautions before using.
Wear protective eyewear and rubber gloves.
Ensure work area is well-ventilated during application and until surface is dry.
Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results.
Allow new grout installations to cure for a minimum of 72 hours prior to application.
Make sure that the surface of the stone is thoroughly cleaned and free of any debris.
Make sure surface is clean, free of waxes, coatings, and previous sealers, and is dry for 24–72 hours.
Surface must remain dry and free from moisture for the entire cure period.
Surface temperature should be between 50 °F and 80 °F.
Ensure that the area is well-ventilated during application and until the surface is dry.
Keep children and pets out of the area until treated surface is dry.
Thoroughly clean the surface with Klenz-All™ Heavy Duty Stone, Tile & Grout Cleaner and Degreaser
Rinse and dry the surface.
Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
Shake well before using.
Liberally apply an even coat of Enhancer Pro with a paintbrush, paint roller or solvent-resistant low-pressure sprayer
For small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up sprayer such as the Bane-Clene Stainless Steel Sprayer. Do not use a power sprayer with StoneTech Enhancer Pro Sealer. Power sprayers create a significant amount of overspray, resulting in wasted product and the need for additional clean-up.
Allow to penetrate the surface for 5-30 minutes for maximum penetration; denser material may require more time for enhancer to penetrate. During this time, distribute excess over entire area to ensure even penetration. Wipe off any excess prior to drying. DO NOT ALLOW EXCESS TO DRY COMPLETELY ON SURFACE! Failure to remove excess sealer may result in a film or residue that may need to be mechanically removed.
A second coat is recommended for porous or absorbent surfaces and should be applied one hour after initial application as directed above.
Do not walk on surface for at least 4 hours. Full cure is achieved in 24 - 48 hours.
Clean up promptly after job is complete.
Clean equipment with mineral spirits and allow to dry in a well-ventilated area.
Rags and equipment that are wet with product may be flammable.
Allow rags to dry in a well-ventilated area out of reach of children and pets.
When cleaning rags are dry, dispose of in accordance with local waste disposal regulations.
WARNING: The color enhancement is irreversible.
To maintain the stone’s natural beauty, clean surface as needed with StoneTech Professional Revitalizer™ or All Purpose Stone & Tile Cleaner.
Properties & Specifications:
Restrictions on Use: Professional Use Only. Keep out of the reach of children.
Manufacturer: StoneTech™ Professional™.
Country of Manufacture: United States of America.
Storage: Store in a well-ventilated place. Keep container tightly closed.
Solubility: Not soluble in water.
Use pH: Not applicable with solvents.
Coverage: 150–400 sq ft per gallon square feet per gallon, depending on porosity of stone.
Shelf Life: Factory sealed containers of this product are guaranteed by the manufacturer to be of first quality for two (2) years if stored at temperatures >50°F and <90°F.
Expected Wear (With Proper Care): Enhanced look now lasts up to 5 years in the sun! - Great for use outdoors.
VIDEO: How to Enhance & Protect Stone with Enhancer Pro from Bane-Clene®
Enhancer Pro Solvent Based Heavy Duty Color Enhancing Impregnating Stone Sealer provides heavy duty color-enhancing protection to natural stone such as Granite, Limestone, Marble, etc.
Free Bane-Clene Information Package
Free packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.