StoneTech™ Polishing Powder for Marble, Limestone, Travertine, Terrazzo

from Bane-Clene®

Item # 61249

  • Formerly "Euro Polish"
  • Removes light scratches
  • non-acidic
  • No Hazardous Vapors
  • Creates smooth, satin finish.
  • Eliminates light wear patterns.
  • For use on marble, limestone, travertine, and terrazzo
  • Coverage: 500-1,000 sq ft per pound

  • Add to Cart
  • StoneTech™ Polishing Powder for Marble, Limestone, Terrazzo, Travertine and Other Natural Stone Surfaces

    from Bane-Clene® Corp.

    Limestone Honing and Polishing

    StoneTech Marble Polishing Powder is a non-acidic polishing compound that also removes light scratches, mild acid etching, light wear patterns and restores the surface to an even polished finish.

    Features and Benefits of StoneTech Polishing Powder:

    • Removes light scratches.
    • Removes mild acid etching.
    • Restores natural polish.
    • Rejuvenates polish.
    • Cleans and polishes.
    • Easy application.
    • Non-acidic.
    • No hazardous vapors.
    • Polishing Powder is designed to Polish most:

    Directions for Polishing Stone:

    1. We STRONGLY recommend that you purchase the Stone, Tile & Grout Training DVD Set and also attend the Stone Care hands-on training class.
    2. Always test in a small inconspicuous area to determine ease of application and desired results.
    3. Allow new grout installations to cure for a minimum of 72 hours prior to polishing.
    4. Make sure surface is flat and smooth.
    5. Deep scratches or strong acid etching may require StoneTech Honing Powder applied in multiple applications.
    6. Make sure surface is clean, dry and free of waxes and coatings.
    7. If surface is heavily soiled, pre-clean with Klenz All™ Heavy Duty Stone & Tile Cleaner as applicable.
    8. Mask off baseboards, carpet, etc. with protective plastic and / or blue painter’s tape.
    9. If you are using Polishing Powder following the use of Honing Powder products, ensure that the surface is well rinsed and a new polishing pad is used.
    10. Apply about 1/2 cup Marble Polishing Powder plus 1 cup clean water to stone surface.
    11. Refinish using a hand orbital sander or a weighted heavy-duty 175 rpm floor machine at 130 to 140 lbs., 175 rpm, fitted with a Gorilla® Hogs Hair / Natural Hair Floor Pad.
    12. Keep compound wet while buffing with plenty of water. Add Polishing Powder as needed.
    13. Buff area until desired level of polish is achieved.
    14. Rinse well and use a wet vacuum or hot water extraction unit to remove all excess compound.
    15. NOTE: It is best to use Honing Powder 800 before using Marble Polishing Powder.
    16. Coverage: Approximately 800 to 1,200 sq. ft. per jar of Marble Polishing Powder, depending on type of stone and level of polish desired.
    17. Charge: At least $1.00 per square foot.
    18. To maintain the stone’s natural beauty, seal the surface with Stone Sealer, Impregnator Pro™, Sta-Clene® or Bullet Proof™.
    19. For maintenance cleaning, use StoneTech Revitalizer™ or StoneTech All Purpose Stone & Tile Cleaner.

    Additional Stone, Ceramic and Porcelain Tile & Grout Information:

    Related Stone Care Videos:

    VIDEO: How to Hone and Polish Marble, Limestone, Travertine, etc.

    Video shows how to remove scratches and dull areas from Marble and other soft stones and bring the surface to a high polish shine.

    Free Bane-Clene Information Package

    Bane-Clene Paper CatalogFree packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

    You can also order the packet at the Catalog Request Form.

    ABC - Sitemap“A to Z” Alphabetical Index to the Bane-Clene Web Site

    Bane-Clene Home Page

    “Proudly Made in the USA”
    Proudly Made in America

    Print this page