3-D Base Unit for most Bane-Clene Truckmount Carpet Cleaning Machines

3D™ BASE UNIT for most Bane-Clene® Truckmount Carpet Cleaning Machines

Item # 50031



  • Truck Mount Power in a portable machine
  • Please call 1-800-428-9512 (U.S. ONLY!) for more information.
  • Not Available for Purchase Online.


$7,495.00
Each
  • Please Call to Order
  • 3-D Base Unit for most Bane-Clene Truckmount Carpet Cleaning Machines

    from Bane-Clene® Corp.

    Base Unit

    The Bane-Clene 3-D Base Unit allows the carpet cleaning company the ability to achieve truck-mounted results when connected with Bane-Clene solution and recovery tanks.

    Specifications

    • ELECTRICAL SYSTEM:
      All electric - 110V - 60 Hz - Single Phase
      1 1/2 HP Vacuum Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
      1/2 HP Solution Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
      Power Supply:
      2 - 15 ft power cords
      All wiring 12 GAW - vinyl wrapped - insulated - HD
      HD cord restraints on power cords for safety.
      2 - HD power switches with watertight covers
      Lighted heater switch with watertight cover
      Separate vacuum and solution pump ampmeters to monitor equipment performance.
      Amperage:
      Vacuum: 9 amps at 75% restriction.
      Solution pump: 4 amps at 150 PSI
      Solution pump with heater: 16 amps.
    • VACUUM SYSTEM:
      Pump:
      Positive displacement - HD cast iron housing.
      HD lobe-type impellers for long life.
      2" inlet and 2" outlet ports.
      Greater vacuum than previous unit.
      Easy access for oil and grease maintenance.
      Intake filter: Stainless steel.
    • Capacity:
      20 gallons recovery.
      Stainless steel vacuum relief valve.
      Tank access door for cleaning and maintenance.
    • Exhaust:
      Large - HD construction - baffled - steel silencer with clean-out ports.
      Allows for VERY quiet operation indoors.
      Exhaust disconnect for maintenance.
    • HEATER SYSTEM:
      1500 watt immersion type heater with thermostat and indicator light.
      12 amp draw.
      Stainless steel heat exchange housing 400 PSI rated with easy access clean-out hardware.
      Insulated heater housing with high pressure relief valve.
      Lighted indicator on/off switch.
    • SOLUTION SYSTEM:
      Pump:
      Positive displacement HD cast iron housing.
      Requires no maintenance.
      Pressure:
      150 PSI operating pressure.
      30% more GPM than previous unit.
      0.6 GPM optimal water usage.
      Filters:
      50 mesh - primary - HD brass filter.
      50 mesh - secondary brass inline filter.
      Capacity:
      20 gallons solution.
      Construction:
      Stainless Steel.
    • CONSTRUCTION:
      14 gauge stainless steel with 3/16" HD aluminum component/base plate.
      Motor intake vents and louvered doors.
      4 strap mounting brackets with velcro straps on cylinder for carrying cords, hoses, cleaning heads, etc.
      1 1/2" recovery dump valve
      4 non-marring 5" heavy-duty easy rolling casters
      Front and rear swing-up handles.
      Gauge Package:
      Glycerin filled vacuum lift and solution pressure gauge.
      2 amperage gauges.
      Hour meter.
      Easy access, removable gauge panel.
    • Weight and Dimensions:
      Approximately 270 pounds.
      18" W x 40" H x 48" L

    Accessories:

    • Complete Training
    • Standard Installation
    • Operations Manual.

    Warranty:

    • Warranty: 5-Year Conditional Warranty.

    Additional Information on Bane-Clene Truck-mounted Carpet Cleaning Equipment:


    Click the “Usage & Tips” tab above for a related article titled “Noise Pollution from Carpet Cleaning Equipment”.


    Free Bane-Clene Information Package

    Bane-Clene Paper CatalogFree packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

    You can also order the packet at the Catalog Request Form.


    ABC - Sitemap

    “A to Z” Alphabetical Index to the Bane-Clene Web Site


    “Proudly Made in the USA”
    Proudly Made in America

    Print this page


    Noise Pollution from Carpet Cleaning Equipment

    Noisy versus quiet carpet truckmount carpet cleaning equipment

    Bane-Clene Truckmounted Carpet Cleaning Equipment Is MUCH Quieter than the Competition!

    Noisy automobiles with loud sound systems permeate nearly every neighborhood in America. Airplanes, motorcycles, boats, hot rods and race cars send up a nerve-deadening din that must ripple across the twilight zone. If you’re cleaning a home or business in the evening, neighbors will be upset if your machine is too noisy.

    Many communities have sound ordinances, especially with restrictions in the evening. In many cities, most carpet cleaners aren’t able to clean at night because of these restrictions, but Bane-Clene equipment will be acceptable in most instances.

    Concern about noise in carpet cleaning equipment has sent Bane-Clene® engineers to the decibel meter to test our equipment for noise pollution. A boom box, trade-in gasoline-powered truck-mounts, a trade-in portable machine and a Bane-Clene® machine were used for the decibel tests. Bane-Clene® equipment fell well within OSHA standards.

    Decibel (dB) Readings at Indicated distances Away from Equipment
    Equipment Tested 5 feet away 50 feet away 100 feet away 400 feet away
    Boom Box 91.8 dB* 78.7 dB 69.6 dB 63.6 db
    Brand X - Gas Truck-Mount 18 Horsepower 100.3 dB 89.5 dB 84.6 dB 75.4 dB
    Brand Z - Gas Truck-Mount 16 Horsepower 98.7 dB 88.7 dB 78.8 dB 72.6 dB
    Brand Y - Portable (electric) 86.9 dB 79.3 dB 73.2 dB 67.9 dB
    Bane-Clene® Truck-Mount 75.1 dB 69.9 dB 63.1 dB 59.6 dB

    *NOTE: All measurements are in decibels(dB).

    In addition, Bane-Clene truck-mount carpet cleaning equipment are muffled by the insulation of the van. When operated with the van doors closed, the sound of the carpet cleaning machine was barely audible. At 5 feet, the decibel level was only 71.2.

    Related Truckmount Carpet Cleaning Equipment Articles and Information:

    Related YouTube Bane-Clene Equipment Maintenance Videos:

    • Video: How to Install Bane-Clene Truckmount Carpet Extractor into van
    • Video: How to lubricate, change oil, grease the blower, back flush, maintain the Bane-Clene Truckmounted Carpet Cleaning machines

    Free Bane-Clene Information Package

    Bane-Clene Paper CatalogFree packet of information about Bane-Clene can be obtained by calling toll-free 1-800-428-9512 (U.S. ONLY!). Your information packet will include a full color catalog and price addendum. Packets will arrive in approximately 2 weeks through standard United States Mail.

    You can also order the packet at the Catalog Request Form.


    ABC - Sitemap“A to Z” Alphabetical Index to the Bane-Clene Web Site

    Bane-Clene Home Page


    Print this page


    Bane-Clene Logo

    Copyright: Bane-Clene® Corp.

    Date Modified: March 3, 2019

    Date Originally Published: March 1, 1997

    ELECTRICAL SYSTEM
    All Electric - 110V - 60 Hz - Single Phase
    1 1/2 HP Vacuum Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
    1/2 HP Soluton Pump Motor with sealed bearings and manual reset overload protector (no maintenance).
    Power Supply:2 - 15 ft power cords All wiring 12 GAW - vinyl wrapped - insulated - HD. HD cord restraints on power cords for safety.
    2 - HD power switches with watertight covers Lighted heater switch with watertight cover Separate vacuum and solution pump ampmeters to monitor equipment performance.
    Amperage:Vacuum: 9 amps at 75% restriction.
    Solution pump: 4 amps at 150 PSI
    Solution pump with heater: 16 amps.
    VACUUM SYSTEM
    Pump:Positive displacement - HD cast iron housing. HD lobe-type impellers for long life. 2" inlet and 2" outlet ports. Greater vacuum than previous unit. Easy access for oil and grease maintenance. Intake filter: Stainless steel.
    Capacity:20 gallons recovery. Stainless steel vacuum relief valve. Tank access door for cleaning and maintenance.
    Exhaust:Large - HD construction - baffled - steel silencer with clean-out ports. Allows for VERY quiet operation indoors. Exhaust disconnect for maintenance.
    HEATER SYSTEM
    1500 watt immersion type heater with thermostat and indicator light. 12 amp draw. Stainless steel heat exchange housing 400 PSI rated with easy access clean-out hardware.
    Insulated heater housing with high pressure relief valve. Lighted indicator on/off switch.
    SOLUTION SYSTEM
    Pump:Positive displacement HD cast iron housing. Requires no maintenance.
    Pressure:150 PSI operating pressure. 30% more GPM than previous unit. 0.6 GPM optimal water usage.
    Filters:50 mesh - primary - HD brass filter. 50 mesh - secondary brass inline filter.
    Capacity:20 gallons solution.
    Construction:Stainless Steel.
    CONSTRUCTION
    14 gauge stainless steel with 3/16" HD aluminum component/base plate. Motor intake vents and louvered doors.
    4 strap mounting brackets with velcro straps on cylinder for carrying cords, hoses, cleaning heads, etc.
    1 1/2" recovery dump valve 4 non-marring 5" heavy-duty easy rolling casters Front and rear swing-up handles.
    Gauge Package:Glycerin filled vacuum lift and solution pressure gauge. 2 amperage gauges. Hour meter. Easy access, removable gauge panel.
    Weight and Dimensions:Approximately 270 pounds. 18" W x 40" H x 48" L
    ACCESSORIES
    Complete Training
    Standard Installation
    Operations Manual.
    Warranty:5-Year Conditional Warranty.